8300100550 VBH0450CTRLS ebmpapst

Description

The ebmpapst 8300100550 VBH0450CTRLS is a high-performance 400VAC EC Centrifugal Fan featuring a RadiPac backward-curved, single-intake impeller with a support bracket, specifically engineered for mission-critical cooling in Industrial Frequency Converters and high-precision HVAC systems. Driven by a 3-phase high-efficiency EC external rotor E11229-60 motor with integrated electronics and maintenance-free ball bearings, this unit operates on a 380 – 480 VAC supply delivering a Max. Power Consumption of 1430 W and a Max. Current Draw of 2.2 A at a rated speed of 2110 RPM. This High-performance unit achieves a Max. Air Flow of 3507.9 CFM (5960.0 m³/h / 99.33 m³/min) and a Max. Static Pressure of 57.51 mmH₂O (564.0 Pa / 2.27 inAq). Featuring intelligent speed regulation via 0-10V/PWM and RS-485 MODBUS-RTU (V5.1), integrated PID controller, and passive PFC, this 5-blade unit with PP plastic construction is optimized for industrial VFD systems requiring advanced motor protection and massive airflow in a black-painted rotor design at the end.

8300100550 Fan Parameters
Model Number: 8300100550
Ident Number: VBH0450CTRLS
Manufacturer: ebmpapst
Type: EC Centrifugal Fan (RadiPac, backward-curved, single-intake, with support bracket)
Impeller Size: 450 mm
Motor Model: E11229-60
Weight: 45 kg
Dimensions: 560 x 560 x 360 mm
Bearing Type: Ball bearing
Phase: 3~
Nominal Voltage: 400 VAC
Nominal Voltage Range: 380 – 480 VAC
Frequency: 50 / 60 Hz
Method of Obtaining Data: ml (Max. load)
Max. Current Draw: 2.2 A
Max. Power Consumption: 1430 W
Rated Speed: 2110 RPM
Max. Air Flow: 3507.9 CFM (5960.0 m³/h / 99.33 m³/min)
Max. Static Pressure: 57.51 mmH₂O (564.0 Pa / 2.27 inAq)
Working Air Flow: 5960.0 m³/h
Static Pressure Increase: 564.0 Pa
Efficiency Grade N: 80.4
Overall Efficiency ηes: 71.4%
Control Interface: Control input 0-10 VDC / PWM; RS-485 MODBUS-RTU (V5.1)
Output Signal: Status relay; Output 10 VDC (max. 10 mA)
Technical Features: Integrated PID controller; Passive PFC; MODBUS V5.1; Soft start; Power limiter; Motor current limitation; Line undervoltage / phase failure detection; EEPROM write cycles (100,000 max)
Motor Protection: Thermal overload protector (TOP) internally connected; Electronic motor protection
Number of Blades: 5
Insulation Class: Class F
Degree of Protection: IP55
Protection Class: I (if protective earth is connected)
Impeller Material: PP plastic
Housing Material: Sheet steel, galvanized (Support plate); Steel, painted black (Support bracket)
Inlet Nozzle Material: ABS plastic
Rotor Surface: Painted black
Direction of Rotation: Clockwise (viewed toward rotor)
Installation Position: See legend on product drawing
Mode: S1
Ambient Temperature (Max.): 40 °C (Transport/Storage: +80 °C)
Min. Operating Temperature: -40 °C (Transport/Storage: -40 °C)
Standard Compliance: EN 61800-5-1; CE; UKCA
Approval: UL 1004-7 + 60730-1; EAC; CSA C22.2 No. 77 + CAN/CSA-E60730-1

Application
The ebmpapst 8300100550 RadiPac module is the primary cooling component for industrial frequency converters and ventilation systems requiring high-efficiency EC performance, PID control, and integrated MODBUS-RTU communication.

Specifications